So you have a water damaged phone and you’re not just happy with yourself. Perhaps the thought of losing the information contained in the phone is driving you nuts. If this is your case, then you’re not alone. Most of us have been there too.
Water spills can cause great damage to electronics generally. But the good news is, your phone can be recovered only if you act immediately. How to fix a water damaged phone? Here’s a 6-step Do-It-Yourself guide to ensure you don’t lose your phone altogether.
Also Read>> How To Recover Hacked Facebook Account
Stop the spill from the source
The first step you take when there is a spill on your phone is to stop the spill from the source. Or remove the phone from the spill immediately to cushion the effect of the spill.
Turn off the phone or remove the battery
The next step to take in other How to fix a water damaged phone is to take out the battery as soon as you can. Taking out the battery is necessary as it interrupts the flow of current in the phone. For most recent phones with sealed designs, you may not be able to remove the battery. So the only option here would be to switch off the phone like you usually would.
Break It Down
If the water has seeped into deep areas of your phone, you will need some technical skills to do a proper cleaning. It will be a great idea to take your phone apart by unscrewing. This is a bit tricky so there’s a caveat to it; only unscrew your phone if you are technically inclined. Also, do not try to lose certain areas you may have difficulty putting back together. If this option is a bit of a task for you, visit a mobile phone service centre.
Clean and Dry It Off
Don’t be afraid to give your phone a gentle shake so the liquid can find a way out. Do a thorough check to see how much liquid has gone into your phone. If the quantity of liquid that got into the phone is small, use a paper towel to clean the surface of the phone. It’s also worth noting that you need a lot of patience to allow the water to dry off properly.
Replace the battery and observe
Power on the phone and observe if there’s any abnormal behaviour. If your phone is working as expected, you would have fixed your water damaged phone. If at this point, your phone no longer powers on, contact a mobile phone service centre.
Plan for the future
Is it possible to stop water spills from happening again? Yes, of course! It’s pretty easy. Stop taking your phone into the bathroom. If you can’t do without your phone in the bathroom, you can always buy a waterproof case for your phone. Should you need a new smartphone, check Jumia or Aliexpress.
Frequently Asked Questions
Q1: What should I do immediately after my phone gets wet?
Ans: The first step is to power off the phone immediately, if it’s still on. Remove the SIM card and any other peripherals, like a memory card, and pat the phone dry with a clean cloth.
Q2: Can I use a hair dryer or heat gun to speed up the drying process?
Ans: No, using heat sources like a hair dryer or heat gun can actually cause further damage. It’s best to let the phone air dry naturally.
Q3: How long should I leave my phone to dry?
Ans: Ideally, leave your phone in a dry, well-ventilated area for at least 24-48 hours. You can place it in a bag of uncooked rice or use specialized silica gel packs to absorb moisture.
Q4: Is using rice really effective for drying a wet phone?
Ans: While rice can help absorb moisture, it’s not as effective as other desiccants like silica gel. If possible, use silica gel packs for better results.
Q5: What about vacuum-sealing the phone in a bag?
Ans: This technique can be effective in removing some moisture, but it’s not foolproof. It’s still recommended to air dry the phone afterwards.